Kubota B26-Series, Tractor Specifications

Model		B26
Engine	Gross power (SAE)	26.0 HP
	Net power (SAE)	23.3 HP
	Total displacement	68.5 cu.in
	No. of cylinders	3
	Rated speeds	2800 rpm
Max. PTO power		19.5 HP
Fuel tank capacity		8.2 gal (24 liters)
Tire size	Front	23x8.50-14 R4 (IND)
Tire size	Rear	12.4-16 R4 (IND)
Wheelbase		62.2 in
Tread	Front	35.6 in
Tread	Rear	41.3 in
Weight with Loader, Backhoe and ROPS/FOPS		4001 lbs
Min. turning radius		8.2 ft
Rear PTO		Live independent, 9.0 r/s
Clutch		N/A
Power steering		Hydrostatic
Transmission	Type	HST
	No. of speeds	Forward 3, Reverse 3
	Max. traveling speed	11.1 mph
	Range shift lever position	Seat side, right
Brake type		Wet disc
Hydraulic system	Pump capacity	11.2 GPM
	3-point hitch lift capacity at 24 in. (610 mm) behind lift point	1676 lbs
	Position control	Standard
3-point hitch (Category I)		Standard
ROPS		Standard (4 post)
FOPS		Standard
Others	Loader-integrated reinforced frame	Standard
	Reversible seat	Standard
	Tilt steering	Standard
	Muffler	Enclosed (w/ spark arrestor)
	Cup holder	Standark
	Engine start key & Hand throttle	Seat side, right
	Lights	F2, R2, Standard
	Armrest	Standard

Tractor Model	B26
Lift capacity to max. height at bucket bottom mid point:	1102 lbs
Lift capacity to max. height at pivot pin:	1300 lbs
Breakout force	2344 lbs
Control valve	One detent float position power beyond circuit
Net weight (Approx.)	628 lbs
Auto-leveling mechanism	Mechanical spill guard
Operating Dimensions	l
A. Maximum lift height to pivot pin	94.5 in
B. Clearance w/bucket dumped	70.0 in
C. Reach at maximum height	22.3 in
D. Maximum dump angle	45 deg
E. Reach w/bucket on ground	61.5 in
F. Bucket rollback angle	46 deg
G. Digging depth	7.0 in
H. Overall height in carry position	49.5 in
Performance Ratings (No Load)	l
Raise to full height	3.6 sec
Lowering time self level valve	2.4 sec
Attachment rollback time	3.4 sec
Attachment dumping time	1.8 sec
l	Tires applied: 23x8.50-14 (Front) and 12.4-16 (Rear)

Tractor Model	B26
Digging force using bucket cylinder	4211 lbs
Digging force using dipperstick cylinder	2123 lbs
Boom swing mechanism	Two cylinders
Operating Dimensions:	l
A. Transport height	89.1 in
B. Stabilizer spread-transport	53.0 in
C. Ground clearance	11.3 in
E. Overall width	53.7 in
F. Maximum digging depth	99.8 in
G. Digging depth, 2ft flat bottom	98.3 in
H. Digging depth, 8ft flat bottom	77.0 in
J. Operating height, fully raised	129.8 in
K. Loading height	77.3 in.
L. Loading reach	52.1 in
M. Reach from swing pivot	133.9 in
N. Swing pivot to rear axle center line	33.7 in
P. Bucket rotation	181.2 deg
X. Swing arc	180 deg
R. Stabilizer spread-operating	83.3 in
A3. Angle of departure per SAE J-1234	20.3 deg
U. Leveling angle	10.7 degl